My Energi Zappi EV Charger Installation in Bury St Edmunds carried out by JDH Electrics. Do you need an EV Charger installed? Contact us today for a free estimate!

A new dedicated Fusebox External IP Rated Electric Vehicle consumer unit & circuit has been installed to serve the new charger – including a surge protection device. At the same time Ultra EV Steel Wire Armoured cable has neatly been cleated from the new consumer unit to the charge point location – which includes separate data cores to monitor the properties energy consumption and future solar generation also battery storage. This uses CT Clamps which feeds into the charger using just one cable & provides data to the app for monitoring and smart charging features.

The Charge Point has been installed onto a dedicated My Energi Pedestal for freestanding charging at the end of the driveway

The EV Charger has been fully inspected & tested using the latest Kewtech KT66DL device, including fault simulation for peace of mind. We have fully certified the project as well as a DNO & Building control notification.

My Energi Zappi EV Charger Installation in Kent carried out by JDH Electrics. Do you need an EV Charger installed? Contact us today for a free estimate!

A new dedicated Electric Vehicle consumer unit & circuit has been installed to serve the new charger – including a surge protection device. At the same time Ultra EV Steel Wire Armoured cable has neatly been cleated – which includes separate data cores to monitor the properties energy consumption and future solar generation also battery storage. This uses CT Clamps which feeds into the charger using just one cable & provides data to the app for monitoring and smart charging features.

The EV Charger has been fully inspected & tested using the latest Kewtech KT66DL device, including fault simulation for peace of mind. We have fully certified the project as well as a DNO & Building control notification.

JDH Electrics have installed a new dedicated circuit for a large Swimming Pool & ASHP in Dover, Kent. A new consumer unit has been installed for the heat pump, & all circuits are fully protected by RCD with a surge protection device installed to protect the sensitive equipment.

The full project has been inspected, tested, certified and a building control notification submitted to the local authority.

Do you need Electrics installing for your swimming pool, hot tub or spa? Contact us here today!

My Energi Zappi EV Charger Installation in Stonham Appal, Stowmarket carried out by JDH Electrics. Do you need an EV Charger installed? Contact us today for a free estimate!

A new consumer unit & dedicated circuit has been installed to serve the new charge point – including a surge protection device. At the same time Steel Wire Armoured cable has been buried from the new consumer unit to the charge point location – which includes separate data cores to monitor the properties energy consumption and future solar generation also battery storage. This uses CT Clamps which feeds into the charger using just one cable & provides data to the app for monitoring and smart charging features.

The Charge Point has been installed onto a dedicated My Energi Pedestal for freestanding charging at the end of the driveway

The EV Charger has been fully inspected & tested using the latest Kewtech KT66DL device, including fault simulation for peace of mind. We have fully certified the project as well as a DNO & Building control notification.

JDH Electrics inspected and tested the fixed wiring during an Industrial EICR in Ashford Kent to ensure the electrical installation is safe for continued use and complaint. At the same time any necessary remedial works identified. Some potentially dangerous issues were found at the time of the test including possible access to live parts, loose connections and circuit breakers being over rated for the cable sizes. All of the necessary remedial works have now been carried out.

Some of the elements inspected & tested include:

• Supply polarity and incoming earth
• Distribution Boards
• ‘Extraneous conductive parts’ – Earth bonding to gas & water & steel for example
• Each individual circuit, to include presence of CPC / earthing conductors and to confirm correct polarity
• Continuity of ring final conductors
• Distribution circuits to sub DB’s
• RCD opperation

Do you need an Electrical Installation Condition Report / EICR? Contact us today for a free quotation

JDH Electrics carried out replacement of all commercial light fittings throughout the premiss in Kennett, to energy efficient LED lighting units. Saving the clients money on their electricity bill, more reliable and consistent lighting also brighter rooms. The upgrade included our electrician’s replacing emergency exit lights, ceiling bulkheads & battens also lighting in shower and changing rooms.

The units are brightness and colour temperature adjustable to suit a range of installations and room size – depending on specification and client needs.

Contact us today for a free quotation and to tell us about your project

My Energi Zappi EV Charger Installation in Red Lodge carried out by JDH Electrics. Do you need an EV Charger installed? Contact us today for a free estimate!

A new dedicated External Electric Vehicle consumer unit & circuit has been installed to serve the new charger – including a surge protection device. At the same time Ultra EV Steel Wire Armoured cable has neatly been cleated – which includes separate data cores to monitor the properties energy consumption and future solar generation also battery storage. This uses CT Clamps which feeds into the charger using just one cable & provides data to the app for monitoring and smart charging features.

The EV Charger has been fully inspected & tested using the latest Kewtech KT66DL device, including fault simulation for peace of mind. We have fully certified the project as well as a DNO & Building control notification.

Our electrician’s JDH Electrics initially carried out a full & comprehensive Electrical Installation Condition Report / EICR in Bury St. Edmunds prior to recommending and installing a new consumer units. We tested and inspected the electrical installation to make sure it was safe, and complaint. At the same time any necessary remedial works identified. The circuits have now been divided onto individual RCBO circuit breakers, including a type 2 surge protection device and allowing space for future additions.

A replacement consumer unit has been installed in the garage & downlighting replaced throughout the property with energy efficient LED fittings that are brightness and colour temperature adjustable

Some of the elements inspected & tested include:

• Supply polarity and incoming earth
• Consumer unit
• Earth bonding to gas & water
• Each individual circuit, to include presence of CPC / earthing conductors and to confirm correct polarity
• Continuity of ring final conductors
• Distribution circuit to shed & shed consumer unit
• RCD opperation

The full project has been inspected and tested, also certified with a building control notification submitted to the local authority.

Do you need a consumer unit upgrade? Contact us today for a free quotation!

Partial rewiring of kitchen electrics in Red Lodge for a new kitchen installation carried out by JDH Electrics. Our Electrician modified and re-wired most of the kitchen onto a new grid switch arrangement allowing for neat, tidy & local isolation of the new appliances including dishwasher, microwave, fridge freezer and cooker hood. The circuit for the oven re-located and new LED energy efficient downlight installed at the same time

The full project has been inspected, tested and certified

Do you need your electrics modifying for a new kitchen? Contact us today for a free quotation here!

JDH Electrics have wired a new plant room for a large Swimming Pool & ASHP in Canterbury, Kent. A new IP rated consumer unit has been installed in the pool plant room to prevent any moisture ingress. Along with a dedicated circuit installed for the pool Air Source Heat Pump, as well as a circuit for the sand filter, and pool lighting also pool cover. At the same time a local earth rod has been installed for safety. All circuits are fully protected by RCD and a surge protection device installed to protect the sensitive equipment. The full project has been inspected, tested & certified.

Do you need Electrics installing for your swimming pool, hot tub or spa? Contact us here today!

Our electrician’s JDH Electrics initially carried out a full & comprehensive Electrical Installation Condition Report / EICR prior to recommending and installing a new consumer unit. We tested and inspected the electrical installation to make sure it was safe, and complaint. At the same time any necessary remedial works identified. The circuits have now been divided onto individual RCBO circuit breakers, including a type 2 surge protection device and allowing space for future additions

Some of the elements inspected & tested include:

• Supply polarity and incomming earth
• Consumer unit
• Earth bonding to gas & water
• Each individual circuit, to include presence of CPC / earthing conductors and to confirm correct polarity
• Continuity of ring final conductors
• Distribution circuit to shed & shed consumer unit
• RCD opperation

The full project has been inspected and tested, also certified with a building control notification submitted to the local authority.

Do you need a consumer unit upgrade? Contact us today for a free quotation!

JDH Electrics carried out a full & comprehensive Commercial Electrical Installation Condition Report including Emergency Lighting Testing in Kennett.

The fixed wiring has been tested and inspected to ensure the electrical installation is safe for continued use and complaint. At the same time any necessary remedial works identified.

Whilst there the portable appliances have been tested through PAT Testing

The Emergency lighting failed the drain testing and has been replaced with new LED light fittings throughout the premises

Do you need an Electrical Installation Condition Report / EICR? Contact us today for a free quotation